01
Blow, brush, then wipe
- 01
Remove grit first
Use a blower or a soft brush to lift dust and sand before anything touches the glass. Grit dragged across a coating is the number one cause of scratches.
- 02
Then breathe and wipe
Breathe gently on the lens and wipe in small circles from the centre outwards with the supplied microfibre cloth.
- 03
Stubborn marks
Use a drop of lens cleaning fluid on the cloth, never directly on the lens.
02
After rain or salt spray
Rinse the body under a gentle tap of fresh water, shake off the excess and dry with a soft cloth. IPX7 sealing means water cannot get inside, but salt left on the armour will eventually dull it.
03
Storage
Store in the case with the lens caps on in a dry room. Avoid leaving binoculars in a hot car or a damp shed for long periods. A small silica gel sachet in the case is cheap insurance.
